Bodgers – GPS

 

This week we looked at GPS which stands for Global Positioning System. The idea behind GPS is based on time and the position of  a network of  satellites. The satellites have very accurate clocks and the satellite locations are known with great precision.

Each GPS satellite continuously transmits a radio signal containing the current time and data about its position. The time delay between when the satellite transmits a signal and the receiver receives it is proportional to the distance from the satellite to the receiver. A GPS receiver monitors multiple satellites and uses their locations and the time it takes for the signals to reach it to determine its location . At a minimum, four satellites must be in view of the receiver for it to get a location fix.

We used the Adafruit Ultimate GPS Breakout connected to an Arduino as our GPS receiver. It’s very easy to set up, all we did was install the Adafruit GPS library on our Arduino and this gave us a load of programmes to chose from. We used the parsing sketch which gave us Longitude, Latitude and our location in degrees which we used with google maps to show our location.

See you all again on the 23/Mar/19

Declan, Dave and Alaidh

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s